TDZ, located in Zaragoza and Toledo, (Spain), have been manufacturing equipment for the automotive sector and industrial machinery since 1939. We are proud to celebrate our 75 Anniversary during 2014.
Its beginnings as a producer of injection pumps for the most important industrial vehicle manufacturers, (Mercedes Benz, Robert Bosch, G.M., Case, etc...) provided TDZ with the required human and technical capital to create in the 60's the first hydraulic pump plant.
Currently, TDZ products may be found in more than 100 countries over five continents through our network of distributors, customers and OEM's.
Bezares, S.A. and TDZ Hydraulics, S.A. have been collaborating for many years sharing technology. In August 2010, Bezares S.A. acquired all TDZ assets, such as Machinery, Inventory, Designs and Customer Portfolio to continue with the TDZ production.
Vane Pumps & Motors
Information
TDZ vane pumps and motors are manufactured in a wide range of displacements, from 3 c.c./rev. to 269 c.c./rev for single pumps and hundreds of flow combinations for double and triple pumps.
All TDZ pumps have a low power to weight ratio, high efficiency, low noise level and ease of maintenance.
Ease of maintenance is achieved by the pump design, where the working components are contained within a cartridge which can quickly and easily be replaced without disconnecting the pump from the prime mover.
TDZ vane pumps are hydraulically balanced, reducing wear and eliminating bearing loads from within the pump. The option to rotate the outlet port in relation to the inlet port provides flexibility and easy installation. Depending on the application, there are two versions: low noise industrial and mobile application models.
TDZ Pumps
(single, double and triple)
Type | Series | Displacement (CC/rev or Gal at 1200RPM) |
Max. Speed (r.p.m.) |
Max. Pressure (bar) |
TDZ Design | ||||
Single Vane Pump | BHP1 | 2,... 7 (cc) | 2500 | 175 |
Single Vane Pump | BHP4, BHP6, BHP7 | 26,...235 (cc) | 2500 | 210 |
Denison Design | ||||
Single Vane Pump (Very high pressure) | T7B | 6,...52 (cc) | 2800 | 320 |
Single Vane Pump | T6C, T6D, T6E | 11,...270 (cc) | 2800 | 275 |
Double Vane Pump (Very high pressure) | T7BB, T67CB, T67DB T67EB | 9,...270 (cc) | 2800 | 320 |
Double Vane Pump | T6CC, T6DC, T6EC, T6ED | 11,...270 (cc) | 2800 | 275 |
Triple Vane Pump (Very high pressure) | T67DBB, T67EDB | 9,...270 (cc) | 2800 | 320 |
Triple Vane Pump | T6DCC, T6EDC | 11,...270 (cc) | 2800 | 275 |
Vickers Design | ||||
Single Vane Pump | V10, V20 | 1,... 13 (Gal) | 4800 | 175 |
Single Vane Pump | 20V*, 25V*, 35V*, 45V* | 2,... 72 (Gal) | 2500 | 210 |
Double Vane Pump | 2520V*, 3520V*, 3525V* | 2,... 45 (Gal) | 2500 | 210 |
Double Vane Pump | 4520V*, 4525V*, 4535V* | 2,...72 (Gal) | 2500 | 210 |
Thru Drive Vane Pump | 25VT*, 35VT*, 45VT* | 8,... 72 (Gal) | 2500 | 210 |
TDZ Motors
Type | Series | Displacement (CC/rev or Gal at 1200RPM) |
Max. Speed (r.p.m.) |
Max. Pressure (bar) |
TDZ Design, (bidirectional) | ||||
Single Vane Motor | MH4D | 52,... 115 (cc) | 3000 | 210 |
Denison Design, (bidirectional) | ||||
Single Vane Motor | M4C | 25,... 100 (cc) | 3600 | 210 |
View Catalog
Single Vane Pumps
Double Vane Pumps
Triple Vane Pumps
Thru Drive Pumps
4 Holes, Iso Flange
Vane Pumps
Steering Vane Pumps
Vane Motors
Truck Hydraulics
Information
TDZ-Bezares specialise in supplying equipment packages into the mobile industry predominantly onto commercial vehicles and trailers. The areas served by us are Tipping, Waste collection, Recovery Equipment, Cranes, Access Equipment, Transporters, Road Tankers and others.
To enable TDZ to offer a comprehensive package to the above applications we carry a large stock of the following products: Power Take Off's, Cast Iron Gear Pumps, Bent Axis Piston Pumps, Directional Valves, Pneumatical Controls...
Orders of Power Take Off's can be placed under a single OEM part number because we manufacture all PTO's precisaly to the original manufacturer's specifications. These are just some of them: Allison, Clark, Eaton, Isuzu, Iveco, Kamaz, Mack, Mercedes, Mitsubishi, Nissan, Pegaso, Praga, Renault, Rover, Scania, Spicer, Toyota, Turner, Volkswagen, Volvo, ZF...
Truck Pumps
Type | Series | Displacement (CC/rev) | Max. Speed (r.p.m.) |
Max. Pressure (bar) |
Aluminium Gear Pumps | BEA | 8,...20 | 2000 | 250 |
Cast Iron Gear Pumps | BE | 16,...150 | 2000 | 300 |
Axial Piston Pumps (Straigth) | BZ | 12,...100 | 1700 | 350 |
Bent Axis Piston Pumps | FR | 20,...110 | 2300 | 400 |
Vane Pumps (Single and Double) | T6GC | 10,...100 | 2800 | 320 |
Bezares Products
Pumps | PTOs | Tanks | Valves | Power Packs | Winches | Gearboxes
• Orders of Power Take Off's can be placed under a single OEM part number because we manufacture all PTO's precisaly to the original manufacturer's specifications. TDZ supplies PTO's for the following gear boxes: Allison, Clark, Eaton, Isuzu, Iveco, Kamaz, Mack, Mercedes, Mitsubishi, Nissan, Pegaso, Praga, Renault, Rover, Scania, Spicer, Toyota, Turner, Volkswagen, Volvo, ZF,...
• Proportional tipping valves up to 250 litres and 400 bar, Electrical tipping valves, Monobloc directional valves, Bypass valves with relief valve...
• Hydraulic recovery winches in different sizes in order to fit different vehicles. Birotational. Including disk brake able to hold 100% load.
• Gearbox with possibility of 1, 2 or 3 pump outputs and different mounting,flanges. Wide range of internal ratios. High power and output torque.
Replacement Parts
Information
Whether your application is mobile or industrial, TDZ has the cartridge kit or part you need. All of our kits are manufactured at our plant located in Toledo, Spain.
TDZ replacement parts are manufactured in our modern plant using the latest machining technology. From raw materials to finished product TDZ make sure our parts meet or exceed OEM specifications. Every cartridge kit is fully tested and guaranteed to be free of defects in material and workmanship.
With hundreds of thousands items in stock, we can dispatch the part you need the same day we receive your order. We also carry a complete line of seals, shafts and bearings to make sure your repair is right the first time.
You can depend on TDZ to have all the parts you need to complete the job properly. Since TDZ sells only new, you never have to risk using rebuilt or reaconditioned parts.
Replacement Cartridge kits for Vickers
(10 vane VQ & 12 vane V series - mobile & industrial, applicattions)
20V / 20VQ | 5, 8, 9, 11, 12, 14 Gal/1200 rpm |
25V / 25VQ | 8, 12, 14, 17, 19, 21, 24 Gal/1200 rpm |
30V / 30VQ | 24, 28 Gal/1200 rpm |
35V / 35VQ | 21, 25, 30, 35, 38, 45 Gal/1200 rpm |
45V / 45VQ | 42, 47, 50, 57, 60, 67, 75 Gal/1200 rpm |
Necessary Information: Pump's rotation and if the cartridge kit is mounted in a single or double pump (front body or rear cover cartridge kit). |
Replacement Cartridge kits for Denison
(T6C, T6D, T6E and T7B series)
T7B | 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 14, 15 Gal/1200 rpm |
T6C | 3, 5, 6, 8, 10, 12, 14, 17,20, 22, 25, 28, 31 Gal/1200 rpm |
T6D | 14, 20, 24, 28, 31, 35, 38, 42, 45, 50, 61 |
T6E | 42, 45, 50, 52, 62, 66, 72, 85 Gal/1200 rpm |
Necessary Information: Pump's Rotation and if the cartridge kit is mounted in a single or double pump, (front body or rear cover cartridge kit). Indicate exactly pump model. |
Shafts -Seal kits and shaft seals - Miscellaneous Parts
• Keyed and splined for single, double, triple and thru drive pumps
• Seal kits and shaft seals for single, double, triple and thru drive pumps
• T6, T7, V and VQ series
• NBR and Viton seal kits and shaft seals (ask for different seal materials)
• Primary and secondary shaft seals
• Front body, inlet housing, rear cover, housing bolts, (4 units required), flex plates, bearings, etc...
For single, double, triple,and thru drive pumps.
View Catalog
CETOP Valves
Information
TDZ directional control, pressure control and flow control valves offer you the flexibility to make your system operates the way you need it to operate.
With a wide array of CETOP valve styles and operating capabilities at your selection, TDZ valves maximize the control of your system through various valve combinations limited only by your imagination.
The versatility of designs, and the flexibility of various porting, spool action and circuit options, are just a few of the fundamental benefits you will find with TDZ valves.
Covered in our range is a full selection of CETOP modular valves, (pilot operated check valves, flow control, pressure control, etc...) as well as a complete line of directional control valves in CETOP 3, 5, 7, 8 and 10 operated via AC/DC voltages.
Directional Control Valves
Solenoid Directional Control Valves | |
Max. Pressure | 350 bar, (5000 psi) |
Max flow | ISO 03, (CETOP 3): 80 (31) l/min. (GPM) ISO 05, (CETOP 5): 120 (50) l/min. (GPM) |
Remarks | Optional terminal box, DIN plug-in connector, any worldwide current and frequency are available upon request. |
Pilot Operated Directional Control Valves | |
Max. Pressure | 315 bar, (4500 psi) |
Max flow | ISO 07, (CETOP 7): 300 (80), l/min (GPM) ISO 08, (CETOP 8): 500 (132), l/min. (GPM) ISO 10, (CETOP 10): 1100 (290), l/min (GPM) |
Modular Systems & CETOP Valves
Max. Pressure | 210 bar, (3000 psi) |
Max flow | 70 l.p.m., (20 GPM) |
Port Size | 1/4”, 3/8” |
Model | Modular Relief Valve,,Modular Pressure Reducing Valve, Modular Throttle Valve, Modular Throttle and Check Valve, Modular Check Valve, Modular Pilot Check Valve, Modular Solenoid Check Valve, Multi-station manifold Blocks, modular sub-plates. |
fax (+34) 976 235 557
Contact
Headquarters
TDZ Division Office